, , ,

Solution to 4 Channel Method (4 CM) using TC Nova System

, , ,
pedalboard-nova-system-suhr-riot.jpg

The TC Nova System is a simply awesome pedal. I love it to bits, you can read my review here, TC Nova System review.

One of the criticisms is that you can't do it 4cm, I mentioned this factor in the review "Whilst I totally understand the reason that you can’t to 4CM (4 Channel Method) with the Nova System (i.e. stump up and buy a G-System), it is a real sadness that the drive pedal (and also technically the compressor too) are lost if you decided to run it in the effects loop.”

It really is such a shame to have to lose the drive pedals (and compressor!) if you want to run the unit in the loop, where it technically should be if you are using a distorted amp, as that method also means that you are also loosing an amp channel if you run the Nova System straight into the front end of your clean amp.

This  is a real shame as the Nova Drive/Distortion are fantastic, and one of the best things about the Nova System, and usually most amps are two channel and you end up loosing what I am guessing is a fantastic amp sound too.

I have to say though that it makes some sense not to have the 4 CM method on the Nova System, because TC would want you to buy a full on G-system at three times the amount! If they allowed you to run the Nova System in 4 CM, I am guessing most people wouldn't buy a G-System!But then I had a thought.....yes I do have them sometimes.....you could actually buy another Nova System....maybe even second hand...to run in the loop....this would still cost considerably less than a G-System, or even if you wanted to go 'Rack' for the loop, the G-Major 2 is still more than a Nova System.

So what are some other plus points?

  • You can link the two Nova Systems via midi, meaning you could create a very interesting midi setup

  • Because the Nova System only allows you to insert one controller (that is either a G-Switch or Expression Pedal), by having two units, you get back the preset control in one and the modulation control in the other!

  • It would look cool!

  • You get two of each effect block (one in front of the amp and one in the loop), so you can double up on some of the effects....that is use, for example, an Octaver and pitch shifter or use chorus and flanger together for example!

I think i might start saving up!

Request

I hope that you found this article useful and enjoy my blog, podcast and YouTube channel. I’m always happy to share my thoughts and to help others as much as I can and I will never charge for my blog content. Having said that, I truly appreciate when someone supports me in return for the time it takes to write articles, produce podcasts and videos, where I share my years of work and experience with you.

Here are some ways you can show your appreciation:

Peace

Neil